Iei-integration PCIE-H610 Bedienungsanleitung

PCIE-H610 PICMG 1.3 CPU Card Page iUser Manual MODEL: PCIE-H610 Full-Size PICMG 1.3 CPU Card Supports 32nm LGA1155 Intel® Core™ i7/i5/i3/Pentium®/C

PCIE-H610 PICMG 1.3 CPU CardPage x Figure 4-2: Remove Protective Cover...

PCIE-H610 PICMG 1.3 CPU Card Page 855.4.1 Northbridge Configuration Use the North Bridge menu (BIOS Menu 19) to configure the Northbridge chipset. A

PCIE-H610 PICMG 1.3 CPU CardPage 86 Î 96M 96 MB of memory used by internal graphics deviceÎ 128M 128 MB of memory used by internal graphics device

PCIE-H610 PICMG 1.3 CPU Card Page 87Î VT-d [Disabled] Use the VT-d option to enable or disable VT-d support. Î Disabled DEFAULT Disables VT-d suppo

PCIE-H610 PICMG 1.3 CPU CardPage 88 Î Resume on PCIE Wake [Enabled] Use the Resume on PCIE Wake option to enable or disable resuming from the PCIe

PCIE-H610 PICMG 1.3 CPU Card Page 895.4.3 Integrated Graphics Use the Integrated Graphics menu (BIOS Menu 21) to configure the video device connecte

PCIE-H610 PICMG 1.3 CPU CardPage 90  128 MB  256 MB  Maximum DEFAULT Î IGD - Boot Type [AUTO] Use the IGD - Boot Type option to select t

PCIE-H610 PICMG 1.3 CPU Card Page 91Î On DEFAULT Allows the Number Lock on the keyboard to be enabled automatically when the computer system boots u

PCIE-H610 PICMG 1.3 CPU CardPage 92 5.6 Security Use the Security menu (BIOS Menu 23) to set system and user passwords. Aptio Setup Utility – Copyri

PCIE-H610 PICMG 1.3 CPU Card Page 935.7 Exit Use the Exit menu (BIOS Menu 24) to load default BIOS values, optimal failsafe values and to save confi

PCIE-H610 PICMG 1.3 CPU CardPage 94 Î Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults.

PCIE-H610 PICMG 1.3 CPU Card Page xiFigure B-1: IEI One Key Recovery Tool Menu ...

PCIE-H610 PICMG 1.3 CPU Card Page 95 6 Software Drivers Chapter 6

PCIE-H610 PICMG 1.3 CPU CardPage 96 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product an

PCIE-H610 PICMG 1.3 CPU Card Page 97 Figure 6-1: Introduction Screen Step 3: Click PCIE-H610. Step 4: A new screen with a list of available driver

PCIE-H610 PICMG 1.3 CPU CardPage 98 Step 5: Install all of the necessary drivers in this menu. 6.3 Chipset Driver Installation To install the chi

PCIE-H610 PICMG 1.3 CPU Card Page 99 Figure 6-4: Chipset Driver Welcome Screen Step 7: The license agreement in Figure 6-5 appears. Step 8: Read t

PCIE-H610 PICMG 1.3 CPU CardPage 100 Step 11: Click Next to continue. Figure 6-6: Chipset Driver Read Me File Step 12: Setup Operations are perform

PCIE-H610 PICMG 1.3 CPU Card Page 101Step 14: The Finish screen in Figure 6-8 appears. Step 15: Select “Yes, I want to restart this computer now” an

PCIE-H610 PICMG 1.3 CPU CardPage 102 Figure 6-9: Graphics Driver Welcome Screen Step 6: The License Agreement in Figure 6-10 appears. Step 7: Cli

PCIE-H610 PICMG 1.3 CPU Card Page 103Step 9: Once the Setup Operations are complete, click Next to continue. Figure 6-11: Graphics Driver Setup Op

PCIE-H610 PICMG 1.3 CPU CardPage 104 6.5 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list

PCIE-H610 PICMG 1.3 CPU CardPage xii Figure B-36: Recovery Complete Window ...

PCIE-H610 PICMG 1.3 CPU Card Page 105 Figure 6-14: LAN Driver Installation Step 8: The program begins to install. Step 9: When the driver installa

PCIE-H610 PICMG 1.3 CPU CardPage 106 6.6 Audio Driver Installation To install the audio driver, please do the following. Step 1: Access the driver

PCIE-H610 PICMG 1.3 CPU Card Page 107 Figure 6-17: Audio Driver Installation Welcome Screen Step 7: The driver installation begins. See Figure 6-18

PCIE-H610 PICMG 1.3 CPU CardPage 108 Appendix A A BIOS Options

PCIE-H610 PICMG 1.3 CPU Card Page 109Below is a list of BIOS configuration options in the BIOS chapter. 　 System Overview ...

PCIE-H610 PICMG 1.3 CPU CardPage 110 　 Segment n Speed (%) ...

PCIE-H610 PICMG 1.3 CPU Card Page 111 Appendix B B One Key Recovery

PCIE-H610 PICMG 1.3 CPU CardPage 112 B.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost sys

PCIE-H610 PICMG 1.3 CPU Card Page 113After completing the five initial setup procedures as described above, users can access the recovery tool by pr

PCIE-H610 PICMG 1.3 CPU CardPage 114 partitions. Please take the following table as a reference when calculating the size of the partition. OS O

PCIE-H610 PICMG 1.3 CPU Card Page xiiiList of Tables Table 1-1: PCIE-H610 Model Variations...

PCIE-H610 PICMG 1.3 CPU Card Page 115 Linux o Fedora Core 12 (Constantine) o Fedora Core 11 (Leonidas) o Fedora Core 10 (Cambridge) o Fedora Co

PCIE-H610 PICMG 1.3 CPU CardPage 116 The detailed descriptions are described in the following sections. NOTE: The setup procedures described belo

PCIE-H610 PICMG 1.3 CPU Card Page 117Step 2: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will t

PCIE-H610 PICMG 1.3 CPU CardPage 118 Figure B-4: Command Mode Step 5: The command prompt window appears. Type the following commands (marked in re

PCIE-H610 PICMG 1.3 CPU Card Page 119 Figure B-5: Partition Creation Commands

PCIE-H610 PICMG 1.3 CPU CardPage 120 NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key

PCIE-H610 PICMG 1.3 CPU Card Page 121B.2.4 Build-up Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system.

PCIE-H610 PICMG 1.3 CPU CardPage 122 Step 5: The Symantec Ghost window appears and starts configuring the system to build a recovery partition. In

PCIE-H610 PICMG 1.3 CPU Card Page 123B.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the syste

PCIE-H610 PICMG 1.3 CPU CardPage 124 Figure B-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (78Figure B-

PCIE-H610 PICMG 1.3 CPU CardPage xiv Table 4-1: Jumpers...

PCIE-H610 PICMG 1.3 CPU Card Page 125Figure B-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown

PCIE-H610 PICMG 1.3 CPU CardPage 126 Figure B-16: File Name to Copy Image to Step 8: When the Compress Image screen in 79Figure B-17 prompts, clic

PCIE-H610 PICMG 1.3 CPU Card Page 127Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image C

PCIE-H610 PICMG 1.3 CPU CardPage 128 Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step 0:

PCIE-H610 PICMG 1.3 CPU Card Page 129Step 1: Follow the steps described in Section B.2.1 ~ Section B.2.3 to setup BIOS, create partitions and insta

PCIE-H610 PICMG 1.3 CPU CardPage 130 Step 4: Reboot the system from the recovery CD. When prompted, press any key to boot from the recovery CD. It

PCIE-H610 PICMG 1.3 CPU Card Page 131 Figure B-26: Building the Auto Recovery Partition Step 7: After completing the system configuration, the fol

PCIE-H610 PICMG 1.3 CPU CardPage 132 Step 8: The Symantec Ghost starts to create the factory default image (Figure B-28). Figure B-28: Image Creat

PCIE-H610 PICMG 1.3 CPU Card Page 133BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit iEi Feature ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

PCIE-H610 PICMG 1.3 CPU CardPage 134  Partition 1: /  Partition 2: SWAP NOTE: Please reserve enough space for partition 3 for saving recovery ima

PCIE-H610 PICMG 1.3 CPU Card Page xvBIOS Menus BIOS Menu 1: Main ...

PCIE-H610 PICMG 1.3 CPU Card Page 135recovery partition. After completing the system configuration, press any key to reboot the system. Eject the re

PCIE-H610 PICMG 1.3 CPU CardPage 136 Step 7: The recovery tool menu appears. (79Figure B-33) Figure B-33: Recovery Tool Menu Step 8: Create a fa

PCIE-H610 PICMG 1.3 CPU Card Page 137Figure B-34: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Re

PCIE-H610 PICMG 1.3 CPU CardPage 138 B.5.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1&

PCIE-H610 PICMG 1.3 CPU Card Page 139B.5.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press <

PCIE-H610 PICMG 1.3 CPU CardPage 140 B.5.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type

PCIE-H610 PICMG 1.3 CPU Card Page 141B.5.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and pres

PCIE-H610 PICMG 1.3 CPU CardPage 142 B.6 Restore Systems from a Linux Server through LAN The One Key Recovery allows a client system to automaticall

PCIE-H610 PICMG 1.3 CPU Card Page 143B.6.1 Configure DHCP Server Settings Step 1: Install the DHCP #yum install dhcp (CentOS, commands marked in re

PCIE-H610 PICMG 1.3 CPU CardPage 144 filename “pxelinux.0”; B.6.2 Configure TFTP Settings Step 1: Install the tftp, httpd and syslinux. #yum insta

PCIE-H610 PICMG 1.3 CPU Card Page 1Chapter 1 1 Introduction

PCIE-H610 PICMG 1.3 CPU Card Page 145Debian Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by adding “#”. #vi /etc/in

PCIE-H610 PICMG 1.3 CPU CardPage 146 B.6.4 Start the DHCP, TFTP and HTTP Start the DHCP, TFTP and HTTP. For example: CentOS #service xinetd restart

PCIE-H610 PICMG 1.3 CPU Card Page 147Modify: [image] comment = One Key Recovery path = /share/image browseable = yes writable = yes publ

PCIE-H610 PICMG 1.3 CPU CardPage 148 Figure B-42: Disable Automatically Restart Step 2: Configure the following BIOS options of the client syste

PCIE-H610 PICMG 1.3 CPU Card Page 149MUST be installed in the system, otherwise, the system will automatically restore from the factory default imag

PCIE-H610 PICMG 1.3 CPU CardPage 150 NOTE: A firewall or a SELinux is not in use in the whole setup process described above. If there is a firewal

PCIE-H610 PICMG 1.3 CPU Card Page 151 Step 5: When the following window appears, press <S> to select “Specify Additional Device”.

PCIE-H610 PICMG 1.3 CPU CardPage 152 Step 6: In the following window, select a SATA controller mode used in the system. Then press <Enter>. T

PCIE-H610 PICMG 1.3 CPU Card Page 153Appendix C C Terminology

PCIE-H610 PICMG 1.3 CPU CardPage 154 AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configurati

PCIE-H610 PICMG 1.3 CPU CardPage 2 1.1 Introduction Figure 1-1: PCIE-H610 The PCIE-H610 PICMG 1.3 CPU card is a Socket LGA1155 32nm Intel® Core i3

PCIE-H610 PICMG 1.3 CPU Card Page 155DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical con

PCIE-H610 PICMG 1.3 CPU CardPage 156 LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling sys

PCIE-H610 PICMG 1.3 CPU Card Page 157Appendix D D Digital I/O Interface

PCIE-H610 PICMG 1.3 CPU CardPage 158 D.1 Introduction The DIO connector on the PCIE-H610 is interfaced to GPIO ports on the Super I/O chipset. The D

PCIE-H610 PICMG 1.3 CPU Card Page 159D.3 Assembly Language Samples D.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the

PCIE-H610 PICMG 1.3 CPU CardPage 160 Appendix E E Watchdog Timer

PCIE-H610 PICMG 1.3 CPU Card Page 161 NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for sp

PCIE-H610 PICMG 1.3 CPU CardPage 162 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMP

PCIE-H610 PICMG 1.3 CPU Card Page 163Appendix F F Hazardous Materials Disclosure

PCIE-H610 PICMG 1.3 CPU CardPage 164 F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without

PCIE-H610 PICMG 1.3 CPU Card Page 31.3 Features Some of the PCIE-H610 motherboard features are listed below:  PICMG 1.3 full-size graphics grade s

PCIE-H610 PICMG 1.3 CPU Card Page 165Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium(Cd) Hexavalent Chromium(CR(

PCIE-H610 PICMG 1.3 CPU CardPage 166 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可

PCIE-H610 PICMG 1.3 CPU CardPage 4 1.5 Dimensions The main dimensions of the PCIE-H610 are shown in the diagram below. Figure 1-3: PCIE-H610 Dimens

PCIE-H610 PICMG 1.3 CPU CardPage ii Revision Date Version Changes 25 April, 2014 1.03 Modified LAN pinouts Updated Chapter 2: Packing List 14 Nov

PCIE-H610 PICMG 1.3 CPU Card Page 5 Figure 1-4: External Interface Panel Dimensions (mm)

PCIE-H610 PICMG 1.3 CPU CardPage 6 1.6 Data Flow 6Figure 1-5 shows the data flow between the system chipset, the CPU and other components installed

PCIE-H610 PICMG 1.3 CPU Card Page 71.7 Technical Specifications The PCIE-H610 technical specifications are listed below. Specification/Model PCIE-H

PCIE-H610 PICMG 1.3 CPU CardPage 8 Specification/Model PCIE-H610 FDD One 34-pin floppy disk drive connector Front Panel One 14-pin header (power LE

PCIE-H610 PICMG 1.3 CPU Card Page 9Chapter 2 2 Packing List

PCIE-H610 PICMG 1.3 CPU CardPage 10 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow th

PCIE-H610 PICMG 1.3 CPU Card Page 112.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with

PCIE-H610 PICMG 1.3 CPU CardPage 12 Quantity Item and Part Number Image 1 One Key Recovery CD 1 Utility CD 1 Quick Installation Guide Table

PCIE-H610 PICMG 1.3 CPU Card Page 13Item and Part Number Image LPT cable (P/N: 19800-000049-RS) 7.1-channel HD audio kit with Realtek ALC892 audio

PCIE-H610 PICMG 1.3 CPU CardPage 14 Item and Part Number Image Intel® Core™ i5-2390T processor (LGA1155, dual core 2.7 GHz, 3M cache, 35W, compat

PCIE-H610 PICMG 1.3 CPU Card Page iiiCopyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order

PCIE-H610 PICMG 1.3 CPU Card Page 15Chapter 3 3 Connectors

PCIE-H610 PICMG 1.3 CPU CardPage 16 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 PCIE-H610 Layout

PCIE-H610 PICMG 1.3 CPU Card Page 17Connector Type Label Fan connector (CPU) 4-pin wafer CPU_FAN1 Floppy disk drive connector 34-pin box header

PCIE-H610 PICMG 1.3 CPU CardPage 18 3.2 Internal Peripheral Connectors The section describes all of the connectors on the PCIE-H610. 3.2.1 Audio Kit

PCIE-H610 PICMG 1.3 CPU Card Page 193.2.2 Battery Connector CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified

PCIE-H610 PICMG 1.3 CPU CardPage 20 3.2.3 CPU Power Input Connector CN Label: CPU12V1 CN Type: 4-pin Molex power connector CN Location: See Figure

PCIE-H610 PICMG 1.3 CPU Card Page 21 Figure 3-5: DDR3 DIMM Slot Locations 3.2.5 Digital I/O Connector CN Label: DIO1 CN Type: 10-pin header CN Loca

PCIE-H610 PICMG 1.3 CPU CardPage 22 Pin Description Pin Description 7 Input 3 8 Input 2 9 Input 1 10 Input 0 Table 3-6: Digital I/O Connect

PCIE-H610 PICMG 1.3 CPU Card Page 23Pin Description Pin Description 19 CK_DVI_DATA1 20 CK_DVI_CLK# 21 GND 22 CK_DVI_CLK 23 NC 24 GND 25 NC Tab

PCIE-H610 PICMG 1.3 CPU CardPage 24 3.2.8 Floppy Disk Drive Connector CN Label: FDD1 CN Type: 34-pin header CN Location: See Figure 3-9 CN Pinouts:

PCIE-H610 PICMG 1.3 CPU CardPage iv Table of Contents 1 INTRODUCTION...

PCIE-H610 PICMG 1.3 CPU Card Page 25Pin Description Pin Description 29 GND 30 RDATA- 31 GND 32 SIDE1- 33 GND 34 DSKCHG- Table 3-9: Floppy Disk Pi

PCIE-H610 PICMG 1.3 CPU CardPage 26 3.2.10 I2C Connector CN Label: I2C_1 CN Type: 4-pin wafer CN Location: See Figure 3-11 CN Pinouts: See Table

PCIE-H610 PICMG 1.3 CPU Card Page 27 Figure 3-12: Infrared Connector Location Pin Description 1 VCC 2 NC 3 IR-RX 4 GND 5 IR-TX Table 3-12: Infrared

PCIE-H610 PICMG 1.3 CPU CardPage 28 Pin Description 1 +5 VCC 2 Mouse Data 3 Mouse Clock 4 Keyboard Data 5 Keyboard Clock 6 GROUND Table 3-13: Keyboa

PCIE-H610 PICMG 1.3 CPU Card Page 29Pin Description Pin Description 9 PPD3 10 GND 11 PPD4 12 GND 13 PPD5 14 GND 15 PPD6 16 GND 17 PPD7 18 GND

PCIE-H610 PICMG 1.3 CPU CardPage 30 Pin Description Pin Description 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND Table 3-15: SATA 3Gb/s Drive C

PCIE-H610 PICMG 1.3 CPU Card Page 313.2.16 Serial Port Connector, RS-422/485 CN Label: COM3 CN Type: 4-pin wafer CN Location: See Figure 3-17 CN Pi

PCIE-H610 PICMG 1.3 CPU CardPage 32 3.2.17 SMBus Connector CN Label: SMBUS_1 CN Type: 4-pin wafer CN Location: See Figure 3-18 CN Pinouts: See Tabl

PCIE-H610 PICMG 1.3 CPU Card Page 33 Figure 3-19: SPI Connector Location Pin Description Pin Description 1 SPI_VCC 2 GND 3 SPI_CS0 4 SPI_C

PCIE-H610 PICMG 1.3 CPU CardPage 34 Pin Description Pin Description 1 CLK 2 GND 3 ERAME# 4 NC 5 RESRT# 6 +5V 7 AD3 8 AD2 9 +3V 10

PCIE-H610 PICMG 1.3 CPU Card Page v3.2.11 Infrared Interface Connector ... 26

PCIE-H610 PICMG 1.3 CPU Card Page 353.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface conne

PCIE-H610 PICMG 1.3 CPU CardPage 36 LED Description LED Description A on: linked blinking: data is being sent/received B off: 10 Mb/s green: 100 M

PCIE-H610 PICMG 1.3 CPU Card Page 37The VGA connector connects to a monitor that accepts a standard VGA input. Pin Description Pin Description 1

PCIE-H610 PICMG 1.3 CPU CardPage 38 Chapter 4 4 Installation

PCIE-H610 PICMG 1.3 CPU Card Page 394.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the PCIE-H610 m

PCIE-H610 PICMG 1.3 CPU CardPage 40 WARNING: The installation instructions described in this manual should be carefully followed in order to preven

PCIE-H610 PICMG 1.3 CPU Card Page 414.2.1 Socket LGA1155 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing t

PCIE-H610 PICMG 1.3 CPU CardPage 42 Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make

PCIE-H610 PICMG 1.3 CPU Card Page 43 Figure 4-3: Insert the Socket LGA1155 CPU Step 8: Close the CPU socket. Close the load plate and pull the load

PCIE-H610 PICMG 1.3 CPU CardPage 44 4.2.2 Socket LGA1155 Cooling Kit Installation The cooling kit can be bought from IEI. The cooling kit has a heat

PCIE-H610 PICMG 1.3 CPU CardPage vi 4.6.2 USB Device Connection (Single Connector) ... 55 4.6.3 VGA

PCIE-H610 PICMG 1.3 CPU Card Page 45Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the PCIE-H610. Careful

PCIE-H610 PICMG 1.3 CPU CardPage 46 4.3 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two

PCIE-H610 PICMG 1.3 CPU Card Page 47The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX. Setting Description Closed ATX p

PCIE-H610 PICMG 1.3 CPU CardPage 48 Figure 4-8: Clear BIOS Jumper Location 4.3.3 Wake-on LAN Jumper CN Label: JLAN_PWR1 CN Type: 6-pin header CN L

PCIE-H610 PICMG 1.3 CPU Card Page 49Pin Description Pin Description 1 +3.3V_DUAL 2 +3.3V_DUAL 3 +V3.3LAN2 4 +V3.3LAN1 5 +3.3V 6 +3.3V Table 4-5: Wa

PCIE-H610 PICMG 1.3 CPU CardPage 50 4.5.1 Dual RS-232 Cable with Slot Bracket The dual RS-232 cable slot connector consists of two connectors attach

PCIE-H610 PICMG 1.3 CPU Card Page 514.5.2 DVI-D/USB Kit Installation (DVI Model Only) The DVI-D/USB kit, consisting of one DVI-D and four USB ports,

PCIE-H610 PICMG 1.3 CPU CardPage 52 4.5.3 SATA Drive Connection The PCIE-H610 is shipped with four SATA drive cables. To connect the SATA drives to

PCIE-H610 PICMG 1.3 CPU Card Page 53Figure 4-13: SATA Power Drive Connection 4.5.4 USB Cable (Dual Port) with Slot Bracket The PCIE-H610 is shipped

PCIE-H610 PICMG 1.3 CPU CardPage 54 Step 3: Insert the cable connectors. Once the cable connectors are properly aligned with the USB connectors on

PCIE-H610 PICMG 1.3 CPU Card Page vii6.1 AVAILABLE SOFTWARE DRIVERS ... 9

PCIE-H610 PICMG 1.3 CPU Card Page 55Step 1: Locate the RJ-45 connectors. The locations of the RJ-45 connectors are shown in Chapter 3. Step 2: Ali

PCIE-H610 PICMG 1.3 CPU CardPage 56 Figure 4-16: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB de

PCIE-H610 PICMG 1.3 CPU Card Page 57 Figure 4-17: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor t

PCIE-H610 PICMG 1.3 CPU CardPage 58 Chapter 5 5 BIOS

PCIE-H610 PICMG 1.3 CPU Card Page 595.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain sys

PCIE-H610 PICMG 1.3 CPU CardPage 60 Key Function Page Up key Increase the numeric value or make changes Page Dn key Decrease the numeric value or

PCIE-H610 PICMG 1.3 CPU Card Page 61The following sections completely describe the configuration options found in the menu items at the top of the B

PCIE-H610 PICMG 1.3 CPU CardPage 62 The System Overview field also has two user configurable fields: Î System Date [xx/xx/xx] Use the System Date o

PCIE-H610 PICMG 1.3 CPU Card Page 635.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interf

PCIE-H610 PICMG 1.3 CPU CardPage 64 5.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 4) to configure settings related to the Truste

PCIE-H610 PICMG 1.3 CPU CardPage viii C TERMINOLOGY ...

PCIE-H610 PICMG 1.3 CPU Card Page 65Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Configuration &g

PCIE-H610 PICMG 1.3 CPU CardPage 66 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Information Inte

PCIE-H610 PICMG 1.3 CPU Card Page 675.3.4 SATA Configuration Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of

PCIE-H610 PICMG 1.3 CPU CardPage 68 Î Compatible DEFAULT Configures the on-board ATA controller to be in compatible mode. In this mode, a SATA chann

PCIE-H610 PICMG 1.3 CPU Card Page 695.3.6 USB Configuration Use the USB Configuration menu (BIOS Menu 9) to read USB configuration information and c

PCIE-H610 PICMG 1.3 CPU CardPage 70 keyboard can control the system even when there is no USB driver loaded onto the system. Î Enabled DEFAULT Lega

PCIE-H610 PICMG 1.3 CPU Card Page 715.3.7.1 Floppy Disk Controller Configuration Use the Floppy Disk Controller Configuration menu (BIOS Menu 12) to

PCIE-H610 PICMG 1.3 CPU CardPage 72 Î Device Mode [Read Write] Use the Device Mode option to select the floppy disk controller mode. Î Rear Write

PCIE-H610 PICMG 1.3 CPU Card Page 73Î Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt

PCIE-H610 PICMG 1.3 CPU CardPage 74 Î IO=2F8h; IRQ=3 Serial Port I/O port address is 2F8h and the interrupt address is IRQ3 Î IO=3F8h; IRQ=3, 4 Se

PCIE-H610 PICMG 1.3 CPU Card Page ixList of Figures Figure 1-1: PCIE-H610...

PCIE-H610 PICMG 1.3 CPU Card Page 75Î IO=2D0h; IRQ=10, 11 Serial Port I/O port address is 2D0h and the interrupt address is IRQ10, 11 Î IO=2D8h; IR

PCIE-H610 PICMG 1.3 CPU CardPage 76 Î IO=2D0h; IRQ=10, 11 Serial Port I/O port address is 2D0h and the interrupt address is IRQ10, 11 Î IO=2D8h; IR

PCIE-H610 PICMG 1.3 CPU Card Page 77Î Auto DEFAULT The parallel port IO port address and interrupt address are automatically detected. Î IO=378h; IR

PCIE-H610 PICMG 1.3 CPU CardPage 78 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status CPU

PCIE-H610 PICMG 1.3 CPU Card Page 795.3.8.1 FAN 1 Configuration Use the FAN 1 Configuration submenu (BIOS Menu 15) to configure fan 1 temperature an

PCIE-H610 PICMG 1.3 CPU CardPage 80 Î CPU Temperature DEFAULT Sets the target temperature sensor to the CPU temperature. Î System Temperature1 Sets

PCIE-H610 PICMG 1.3 CPU Card Page 81Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced COM1 Console Redirec

PCIE-H610 PICMG 1.3 CPU CardPage 82 Î 9600 Sets the serial port transmission speed at 9600. Î 19200 Sets the serial port transmission speed at 192

PCIE-H610 PICMG 1.3 CPU Card Page 83Î 1 DEFAULT Sets the number of stop bits at 1. Î 2 Sets the number of stop bits at 2. Î Flow Control [None] Us

PCIE-H610 PICMG 1.3 CPU CardPage 84 Î Auto Recovery Function [Disabled] Use the Auto Recovery Function BIOS option to enable or disable the auto re