Iei-integration RACK-360G Bedienungsanleitung

RACK-360G 4U Rackmount Chassis Version: 1.0 Quick Installation Guide RACK-360G QIG

RACK-360G QIG IEI Technology Corp. Page 2 IMENSION DRAWING e dimensions of RACK-360G are

INSTALLATION STEPS To install the RACK-360G chassis, the following installation steps must be completed: Step 1: Unpack the chassis. Step 2: Install

STEP 4: INSTALL THE POWER SUPPLY UNIT (PSU) Once the top cover and hold-down clamp have been removed, a user supplied PSU must be installed. Compatibl

Figure 8: Remove the Slot Cover Retention Screw Step 2: Slide the CPU card into the socket on the backplane reserved for the CPU card. (See Figure 9

Figure 11: Remove the Four Retention Screws STEP 8.4: INSTALL DRIVES INTO THE MAIN DRIVE BRACKET The main drive bracket has three bays that can supp

Step 2: Place 3.5” HDD into the drive bracket. Make sure the PCB on the 3.5” HDD is placed directly on the bottom surface of the drive bracket and t

1 Reset Switch cable RACK-360G QIG IEI Technology Corp. Page 8 1 HDD LED cable 1 Power

RACK-360G QIG IEI Technology Corp. Page 9 Step 2: Replace the filter pad inside. Step 3: