Iei-integration IOVU-752S Bedienungsanleitung PDF herunterladen (Seite 34)

IOVU-752S Panel PC

Page 27

3.4.3 Arm Mounting

The IOVU-752S is VESA (Video Electronics Standards Association) compliant and can be

mounted on an arm with a 75 mm interface pad. To mount the IOVU-752S on an arm,

please follow the steps below.

Step 1: The arm is a separately purchased item. Please correctly mount the arm onto

the surface it uses as a base. To do this, refer to the installation documentation

that came with the mounting arm.

NOTE:

When purchasing the arm, please ensure that it is VESA compliant and that

the arm has a 75 mm interface pad. If the mounting arm is not VESA

compliant, it cannot be used to support the IOVU-752S.

Step 2: Once the mounting arm has been firmly attached to the surface, lift the

IOVU-752S onto the interface pad of the mounting arm.

Step 3: Align the retention screw holes on the mounting arm interface with those in the

IOVU-752S, as shown in

Figure 3-17.

Figure 3-17: Arm Mounting Retention Screw Holes

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Keine Kommentare

Iei-integration IOVU-752S Bedienungsanleitung Seite 34