Iei-integration PCIE-Q57A Bedienungsanleitung PDF herunterladen (Seite 57)

PCIE-Q57A PICMG 1.3 CPU Card

Page 45

Step 2: Insert the cable connectors. Insert one connector into each serial port box

headers. See

Figure 4-9. A key on the front of the cable connectors ensures the

connector can only be installed in one direction.

Figure 4-9: Dual RS-232 Cable Installation

Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male

connectors secured on a bracket. To secure the bracket to the chassis please

refer to the reference material that came with the chassis. Step 0:

4.7.2 SATA Drive Connection

The PCIE-Q57A is shipped with two SATA drive cables and one SATA drive power cable.

To connect the SATA drives to the connectors, please follow the steps below.

Step 1: Locate the connectors. The locations of the SATA drive connectors are shown

in Chapter 3.

Step 2: Insert the cable connector. Press the clip on the connector at the end of the

SATA cable and insert the cable connector into the on-board SATA drive

connector. See

Figure 4-10.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 158 159

Keine Kommentare

Iei-integration PCIE-Q57A Bedienungsanleitung Seite 57