Iei-integration IMBA-Q454 v1.01 Bedienungsanleitung PDF herunterladen (Seite 168)

IMBA-Q454-R10 User Manual

Page 168

7.1 Intel

AMT Setup Procedure

The IMBA-Q454-R10is featured with the Intel® Active Management Technology (AMT)

3.0. To enable the Intel® AMT function, follow the steps below.

Step 1: Make sure the DIMM1 socket is installed with one DDR2 DIMM.

Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN2_USB23.

Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,

including:

 Intel® AMT Configuration [Advanced]

 ME Subsystem Configuration [Advanced]

 Configure the Intel® Management Engine BIOS extension (MEBx)

(see Section

945H7.2 below)

Step 4: Properly install the Intel® AMT drives. Make sure to install both HECI and

LMS_SOL drivers from the iAMT Driver & Utility directory in the driver CD (see

Section

946H6.8).

Step 5: The following dialog window is displayed after the OS is loaded to show the

Intel® AMT status on the IMBA-Q454-R10 is enabled.Step 0:

Figure 7-1: Intel® Active Management Technology Status Dialog

7.2 Intel

Management Engine BIOS Extension

This section describes the essential steps for using the Intel® Management Engine BIOS

extension (MEBx).

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 212 213

Keine Kommentare

Iei-integration IMBA-Q454 v1.01 Bedienungsanleitung Seite 168