Iei-integration NANO-LX v1.21 Bedienungsanleitung PDF herunterladen (Seite 101)

NANO-LX EPIC SBC

Page 86

Step 1: Locate the connector. The location of the RS-232 connector is shown in

Chapter 3.

Step 2: Insert the cable connector. Insert the connector into the serial port box header.

See

Figure 5-11. A key on the front of the cable connectors ensures the

connector can only be installed in one direction.

Figure 5-11: Single RS-232 Cable Installation

5.8.7 SATA Drive Connection

The NANO-LX is shipped with two SATA drive cables and one SATA drive power cable.

To connect the SATA drives to the connectors, please follow the steps below.

Step 3: Locate the connectors. The locations of the SATA drive connectors are shown

in Chapter 3.

Step 4: Insert the cable connector. Press the clip on the connector at the end of the

SATA cable and insert the cable connector into the onboard SATA drive

connector. See

Figure 5-12.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 191 192

Keine Kommentare

Iei-integration NANO-LX v1.21 Bedienungsanleitung Seite 101