Iei-integration PCISA-945GSE v1.01 Bedienungsanleitung PDF herunterladen (Seite 105)

PCISA-945GSE CPU Card

Page 87

Figure 5-15: USB Device Connection

Step 3: Insert the device connector. Once aligned, gently insert the USB device

connector into the on-board connector. Step 0:

5.9.3 VGA Monitor Connection

The PCISA-945GSE has a single female DB-15 connector on the external peripheral

interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect

a monitor to the PCISA-945GSE, please follow the instructions below.

Step 1: Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3: Insert the VGA connector. Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

PCISA-945GSE. See

8Figure 5-16.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 206 207

Keine Kommentare

Iei-integration PCISA-945GSE v1.01 Bedienungsanleitung Seite 105