Iei-integration IMB-H610A Bedienungsanleitung PDF herunterladen (Seite 69)

IMB-H610 Micro-ATX Motherboard

Page 54

Step 4: Secure the cooling kit by fastening the four retention screw of the cooling kit.

Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector

on the IMB-H610. Carefully route the cable and avoid heat generating chips and

fan blades.

4.3.3 DIMM Ins tallation

To install a DIMM, please follow the steps below and refer to Figure 4-7.

Figure 4-7: DIMM Installation

Step 1: Open the DIMM socket handles. Open the two handles outwards as far as

they can. See Figure 4-7.

Step 2: Align the DIMM with the socket. Align the DIMM so the notch on the memory

lines up with the notch on the memory socket. See Figure 4-7.

Step 3: Insert the DIMM. Once aligned, press down until the DIMM is properly seated.

Clip the two handles into place. See Figure 4-7.

Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The

memory module is ejected by a mechanism in the socket.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 191 192

Keine Kommentare

Iei-integration IMB-H610A Bedienungsanleitung Seite 69