Iei-integration PCIE-G41A2 Bedienungsanleitung PDF herunterladen (Seite 104)

PCIE-G41A2 PICMG 1.3 CPU card

Page 92

 Memory Remap Feature [Enabled]

Use the Memory Remap Feature option to allow the overlapped PCI memory above the

total physical memory to be remapped.



Disabled

Overlapped PCI memory cannot be remapped



Enabled DEFAULT

Overlapped PCI memory can be remapped

 Memory Hole [Disabled]

Use the Memory Hole option to reserve memory space between 15 MB and 16 MB for

ISA expansion cards that require a specified area of memory to work properly. If an older

ISA expansion card is used, please refer to the documentation that came with the card to

see if it is necessary to reserve the space.



Disabled DEFAULT

Memory is not reserved for ISA expansion cards



15 MB–16 MB

Between 15 MB and 16 MB of memory is reserved

for ISA expansion cards

 Initiate Graphic Adapter

Use the Initiate Graphic Adapter option to select the graphics controller used as the

primary boot device. Select either an integrated graphics controller (IGD) or a combination

of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration

options are listed below:

 IGD

 PCI/IGD

 PCI/PEG

 PEG/IGD

 PEG/PCI D

EFAULT

 IGD Graphics Mode Select [Enable, 32 MB]

Use the IGD Graphic Mode Select option to specify the amount of system memory that

can be used by the internal graphics device.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 150 151

Keine Kommentare

Iei-integration PCIE-G41A2 Bedienungsanleitung Seite 104