Iei-integration PCIE-G41A2 Bedienungsanleitung PDF herunterladen (Seite 54)

PCIE-G41A2 PICMG 1.3 CPU card

Page 42

4.2.3 DIMM Installation

To install a DIMM, please follow the steps below and refer to Figure 4-7.

Figure 4-7: DIMM Installation

Step 1: Open the DIMM socket handles. Open the two handles outwards as far as

they can. See

Figure 4-7.

Step 2: Align the DIMM with the socket. Align the DIMM so the notch on the memory

lines up with the notch on the memory socket. See

Figure 4-7.

Step 3: Insert the DIMM. Once aligned, press down until the DIMM is properly seated.

Clip the two handles into place. See

Figure 4-7.

Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The

memory module is ejected by a mechanism in the socket.Step 0:

4.2.4 Backplane Installation

Before the PCIE-G41A2 can be installed into the chassis, a backplane must first be

installed. Please refer to the installation instructions that came with the backplane and the

chassis to see how to install the backplane into the chassis.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 150 151

Keine Kommentare

Iei-integration PCIE-G41A2 Bedienungsanleitung Seite 54