Iei-integration ICE-945GSE v1.11 Bedienungsanleitung PDF herunterladen (Seite 51)

ICE-945GSE COM Express Type 2 Module

Page 39

5.3 SO-DIMM Installation

To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer to

Figure 5-1.

Figure 5-1: SO-DIMM Installation

Step 1: Locate the SO-DIMM socket. Place the ICE-945GSE on an anti-static pad.

Step 2: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a

way that the notch in the middle of the SO-DIMM must be aligned with the

plastic bridge in the socket.

Step 3: Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle. (See

Figure 5-1)

Step 4: Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket

out and push the rear of the SO-DIMM down. (See

Figure 5-1)

Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into

place and secure the SO-DIMM in the socket.Step 0:

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 146 147

Keine Kommentare

Iei-integration ICE-945GSE v1.11 Bedienungsanleitung Seite 51