Iei-integration ICE-945GSE v1.11 Bedienungsanleitung PDF herunterladen (Seite 63)

ICE-945GSE COM Express Type 2 Module

Page 51



Enhanced

Configures the on-board ATA/IDE controller to be in

Enhanced mode. In this mode, IDE channels and SATA

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.

 Legacy IDE Channels [SATA Pri, PATA Sec]



SATA Only

Only the SATA drives are enabled.



SATA Pri, PATA Sec DEFAULT

The SATA drives are enabled on the Primary

IDE channel. The IDE drives are enabled on

the Secondary IDE channel.



PATA Only

Only the IDE drives are enabled.

 IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the IDE Configuration menu:

 Primary IDE Master

 Primary IDE Slave

 Secondary IDE Master

 Secondary IDE Slave

The IDE Configuration menu (

BIOS Menu 4) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section

6.3.2.1 appear.

6.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 146 147

Keine Kommentare

Iei-integration ICE-945GSE v1.11 Bedienungsanleitung Seite 63