Iei-integration NANO-QM770 Bedienungsanleitung PDF herunterladen (Seite 72)

NANO-QM770 EPIC SBC

Page 57

Step 2: Align the DVI-I connector. Align the male DVI-I connector on the digital display

device cable with the female DVI-I connector on the external peripheral

interface.

Step 3: Insert the DVI-I connector. Once the connectors are properly aligned with the

male connector, insert the male connector from the digital display device into the

female connector on the NANO-QM770. See

Figure 4-15.

Figure 4-15: DVI Connector

Step 4: Secure the connector. Secure the DVI-I connector from the digital display

device to the external interface by tightening the two retention screws on either

side of the connector. Step 0:

4.8.2 HDMI Display Device Connection

The HDMI connector transmits a digital signal to compatible HDMI display devices such

as a TV or computer screen. To connect the HDMI cable to the NANO-QM770, follow the

steps below.

Step 1: Locate the HDMI connector. The location is shown in Chapter 3.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 189 190

Keine Kommentare

Iei-integration NANO-QM770 Bedienungsanleitung Seite 72