Iei-integration NANO-QM770 Bedienungsanleitung PDF herunterladen (Seite 75)

NANO-QM770 EPIC SBC

Page 60

Figure 4-18: USB Connector

4.9 Intel

AMT Setup Procedure

The NANO-QM770 is featured with the Intel® Active Management Technology (AMT). To

enable the Intel® AMT function, follow the steps below.

Step 1: Make sure the DIMM1 socket is installed with one DDR3 SO-DIMM.

Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN1.

Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,

Step 4: Properly install the Intel® Management Engine Components drivers from the

iAMT Driver & Utility directory in the driver CD. See Section

6.9.

Step 5: Configure the Intel® Management Engine BIOS extension (MEBx). To get into

the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up

process. Enter the Intel® current ME password as it requires (the Intel® default

password is admin).

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 189 190

Keine Kommentare

Iei-integration NANO-QM770 Bedienungsanleitung Seite 75